Clamps with earthing control (IBC tanks, drums, big-bags)
Below is a list of dedicated technical solutions of Bond-Rite series for monitoring the state of earthing of barrels, tanks, etc. These solutions, in addition to earthing the equipment operating in production rooms, by means of a monitoring unit with a signalling diode, easily and safely verify that the charges accumulated on the equipment are properly discharged to earth. If the earthing is not performed properly, the controllers block the process.
Battery-powered system for controlling earthing of barrels, tanks, etc.
Bond-Rite REMOTE is a 9-volt lithium-magnesium battery-powered system (6 months of operation at 6 hours per day). This system should be used in situations where it is not foreseen to connect the self-testing clamps to the plant components for more than 6 hours. In case of prolonged operation, another earthing control system should be used, e.g. mains-powered Bond-Rite.
Mains-powered system for controlling earthing of barrels, tanks, etc.
The mains-powered Bond-Rite REMOTE EP has a universal ER power supply in a GRP housing and an optional junction box that allows power distribution of up to 10 Bond-Rite units. The use of this system is recommended in situations where continuous earthing monitoring is required, e.g. in the case of a barrel warehouse, where the product is regularly taken from them.
Self-testing clamps for barrels, tanks
Bond-Rite CLAMP is a earthing control system mounted on a wall or other surface. It consists of a self-testing clamp with a 3 to 15 m long spiral cable and a junction box with a pin for hanging up the clamp.
Portable clamp set with self-testing clamp
The Bond-Rite EZ is an easy to use, portable set of clamps with a self-testing clamp, which quickly and safely verifies the equalisation and earthing connections, e.g. when transferring flammable products.
