Ex-Lite – Ex-Escape sign luminaires

The robust escape sign luminaire

The Ex-Lite series of explosion-protected escape sign luminaire fulfils the requirements of ATEX Directive 2014/34/EU and EN 60598, Section 2.22 for emergency lighting luminaires. The luminaires are suited for marking escape routes and exits in potentially explosive atmospheres. Only white, high-efficiency LEDs are used as illuminants for these luminaires. This guarantees maintenance-free operation, as the illuminants do not need replacing throughout the complete service life of the luminaire.

The supply electronics are also laid out for this service life; the LED circuits are intrinsically safe. The wide input voltage range allows international use. The housing of these luminaires is made of robust light alloy: the escape signs comply with the latest standards. Thanks to the very robust design and high degree of protection, these luminaires are suited for both indoor and outdoor use, even under extreme conditions. As an emergency lighting luminaire for maintained operation with self-contained battery system, the Ex-Lite N features an NC battery and automatic function monitoring with operating time test.

With the optional built-in V-CG-S monitoring module with coding switch for max. 20 addresses, this luminaire can also be used as an individually monitored emergency lighting luminaire that is connected to a CEAG emergency lighting supply system. With this, the operator can programme the switching mode according to the respective requirements. Thus, as many as 20 luminaires with different switching modes can be connected to one end circuit.

For all types of application

The escape sign luminaires of the „Ex-Lite“ and Ex-Lite Z series are available as mains luminaires e.g. for specially safeguarded industrial networks in production plants, as “Ex-Lite V-CG-S” emergency lighting luminaires with individual function monitoring for use in CEAG emergency lighting supply systems, as well as “Ex-Lite N” and Ex-Lite ZE emergency lighting luminaires with self-contained battery systems and automatic function and operating time tests.

Green light for all zones

On account of the very robust, light alloy housing in the high degree of protection IP66, the Ex-Lite luminaire can be installed almost anywhere, both indoors and out. The luminaire is designed in the type of protection Ex e m ib IIC up to T6 as well as Ex tb IIIC T80 °C and in accordance with the ATEX Directive. It can be used in hazardous areas with explosive gas atmospheres (Zones 1 and 2) and explosive dust atmospheres (Zones 21 and 22).

Conformity to standards

The Ex-Lite explosion-protected escape sign luminaire series fulfils the requirements of ATEX Directive 2014/34/EU and EN 60598, Part 2.22 for emergency lighting luminaires. It is suited for marking escape routes and exits in hazardous areas. The housing of this luminaire is made of light alloy and it goes without saying that the escape sign comply with the latest standards.

Maintenance-free operation

The white LED technology used as the light source allows maintenance-free operation without replacement of the illuminant. The lighting values required for the escape sign are maintained throughout the complete service life of the LEDs, namely ca. 50,000 hours. It goes with­out saying that the supply electronics are also designed for this extremely long operating time. This reduces operating costs and increases the operating safety considerably, in particular in locations that are not easily accessible.

For international use

The LED escape sign luminaire of the Ex-Lite series was designed to meet the requirements of a large number of different safety concepts. Thanks to the wide input voltage range from 110 V to 277 V AC and up to 250 V DC, this luminaire can be used internationally, whereby the supply circuits of the LED circuits are intrinsically safe.The internationally valid certificate „IECEx“ enhances the scope of this light fitting. With the version Ex-Lite Z and Ex-Lite ZE a special version is available for use in the scope of the NEC regulations. The luminaire has a visibility range of 25 metres and it is available with a wide variety of pictograms, where country-specific solutions can be created without any problems.

Double safety

Whenever the operational safety of explosion- protected safety and escape sign luminaires is involved, there is no room for compromises, as only a luminaire that is fully functional at all times can save human lives. The new series of explosion-protected LED escape sign luminaires not only fulfils the extremely high explosion protection requirements, but it also fulfils the legal requirements for emergency and safety lighting installations. The new Ex-Lite is capable of safely showing the right way to go at all times, even in complex and often badly laid out industrial installations with hazardous areas.

• Robust light alloy housing
• Power-saving LED technology, maintenance-free throughout service life
• High degree of protection IP66
• Luminaire with self-contained battery unit and automatic function monitoring
• Connection and monitoring with CEAG emergency lighting supply systems possible

• Ex-Lite
• Ex-Lite V-CG-S
• Ex-Lite N
• Ex-Lite
• Ex-Lite V-CG-S
• Ex-Lite N
• Ex-Lite Z
• Ex-Lite ZE
• Ex-Lite LT
• Ex-Lite V-CG-S
• Ex-Lite NLT
• Ex-Lite LT
• Ex-Lite V-CG-S
• Ex-Lite NLT