Tag: _explosion_protection

Spark Detection and Extinguishing System

The spark detection and extinguishing system is designed to stop ignition sources from getting into areas at risk of dust explosion, such as silos or dust filters. Extremely fast and sensitive spark detectors detect ignition sources within a millisecond and then start extinguishing with a small amount of water. The extinguishing process usually lasts 5 seconds and stops automatically after which the system automatically switches to normal operation mode.

Read more

Flame Arresters

Wherever inflammable liquids are stored or inflammable mixtures of gases or vapours of products with the air are generated, safeguards must be applied in the form of flame breakers which, in case of ignition occurrence and flame spreading, eliminate the risk of a serious industrial disaster and protect the human life.

Read more

Electrostatic Earthing

Electrostatic earthing systems reduce the risk of explosion of inflammable substances as a result of electrostatic flash-over. They are applied during transport and processing of inflammable gases, liquids and powders. Simple earthing systems consists of a conductor and an earthing clamp, more advanced ones have an earthing state control system that allows for transport/dosing of product only when the earthing has been properly connected. Earthing systems are usually applied for loading/unloading road and railway tankers, drums, tanks, big-bags, process plant elements, etc.

Read more

Explosion decoupling (isolation)

The explosion decoupling (isolation) systems are aimed at closing physically the pipelines, ducts and conveyor transfers that connect the explosion-affected facility with the remaining parts of the plant.

Read more

Explosion relief (venting)

Explosion relief consists in taking out explosion effects (mainly pressure), through a venting system, outside the protected device. As a result, the pressure inside the device is reduced to a safe level.

Read more

Explosion Suppression

An explosion suppression system is the most universal method of protecting equipment and plant from the effects of an explosion. Explosion suppression systems are the only explosion protection solutions that completely cancel the explosion effects and prevent fire.

Read more