The ATEX dust meter is designed for use in harsh industrial environments (including explosive atmospheres) to monitor dust levels in ducts and pipelines. It is most often installed on the clean side of the filters and is used to monitor the correct functioning of the dust extraction units. This allows damage to the filter bags to be detected immediately
Tag: _explosion_suppression
EX 100.1 si zone control panel
The EX 100.1 single zone control unit is a control feature for the explosion suppression system which manages the HRD cylinders, pressure sensors and IR detectors.
EX 8000 / EX 5000 multi zone control unit
The EX 8000 multi zone control unit provides explosion suppression system monitoring, relay of the stored energy impulse to trigger the HRD cylinders, and on-line verification of the system status.
MEX-3.2 dynamic explosion pressure detector
The MEX-3.2 type explosion multi-sensor is a multi-functional dynamic pressure detector and a component of the explosion suppression system. It is installed on processing equipment units, tanks, vessels, piping and ductwork to provide instant detection of the ignition of an explosion.
IR-13 infra-red detector
The IR-13 infra-red detector is an explosion suppression system component installed at ductwork and piping connected to bucket conveyors, filters, tanks and other processing equipment types. It provides instant detection of incipient explosion.
HRD-E type extinguishing cylinders
Application: explosion protection of equipment units (including silos, filters, cyclones, mixers, drying plants, pelleting machines, etc.) in presence of flammables at explosive concentrations levels. The HRD cylinders provide explosion protection for processing equipment units, vessels, and ductwork which contain class ST1 to ST3 particulate matter, gases and/or hybrid mixtures in all industrial sectors.