Brilex KER relief panels are ideal for use in bucket elevators, atmospheric tanks and other protected instruments where there is no variable pressure. One of the many advantages of this panel is the structurally reinforced edges, which allow installation without the need for an outlet flange, thus reducing costs of installation.
Tag: _panels
Brilex KE decompression panels
Brilex KE relief panels are the economically ideal solution for protecting process equipment, where the vacuum does not exceed 60% of the rated opening pressure. Brilex KE panel is a widely used explosion vent protection worldwide, as it is certified for Kst values up to 650 bar m/s and 100% venting efficiency.
Brilex GE decompression panels
Brilex GE relief panels are the ideal solution for protecting process equipment, where frequent and prolonged cycles of vacuum and overpressure occur. A distinctive feature of these dampers is domed design, which gives the panels resistance to negative pressure without the need for additional vacuum solutions.
Vigilex V-FLEX anti-explosion panels
The Vigilex V-FLEX venting panels feature a maximum vacuum pressure of 50 mbar and a burst pressure of 100 mbar ±15% at 20°C; single convex membrane.
Vigilex VL-S anti-explosion panels
The Vigilex VL-S explosion venting panels feature a maximum vacuum pressure of 50 mbar and a burst pressure of 100 mbar ±15% at 20°C. Material(s): stainless steel 304L; single flat membrane design.
Vigilex VD anti-explosion panels
The Vigilex VD explosion venting panels are cost-efficient explosion relief devices with a maximum vacuum pressure of 200 mbar.
Vigilex VL anti-explosion panels
Vigilex VL explosion venting panels: maximum vacuum pressure: 50 mbar; burst pressure: 100 mbar ±15% at 20°C; material(s): stainless steel grade 304L (SST430 frame).