The RFA-CA cartridge immersion heaters in flameproof enclosures. The devices are ATEX and CU TR certified. The products are intended for heating of process media, mainly oils and similar chemicals. The heater can be opened for inspection without breaching the seal and emptying the processing system of the heated medium. The heaters can be installed in processing tanks and other equipment operated in explosive gas atmospheres. The heaters are intended for vertical installation and horizontal installation orientation versions are available on request. The heater can be installed with a threaded end or flanged connection.
Tag: _process_heaters
Immersion heater | ATEX gas / dust zones | RFA-C type
The RFA-C immersion heaters in flameproof enclosures. The devices are ATEX and CU TR certified. The products are intended for heating of process media. They can be installed in processing tanks and other equipment operated in explosive gas or dust atmospheres. The heaters are intended for vertical installation and horizontal installation orientation versions are available on request. The heater can be installed with a threaded end or a flanged connection port.
Plunger Heater | ATEX – gas / dust zone | RFA type
A plunger heater type RFA in a flame-proof enclosure. This device is ATEX, IECEx, CSA, CU TR, KGS, CNEx, CCOE, and Inmetro certified. Heaters of this type are designed for heating up process media. They are used in process tanks, including pressure tanks and other equipment located in gas and dust explosion hazard zones. The heater can be installed vertically or horizontally (optional), using a threaded or flanged connection.
Cartridge immersion heater | ATEX gas zones | FP-CA type
The FP-CA cartridge immersion heater with a flameproof enclosure and replaceable heating element. The devices are ATEX, IECEx, CSA, CU TR, KGS, CNEx, CCOE, and Inmetro certified. These heaters are intended for heating of oil and similar chemicals which require a low heat density. The heaters are applied in processing equipment and piping operated in explosive gas or dust atmospheres. The heaters can be optionally provided with ATEX-certified thermostat controls.
Immersion heater | ATEX gas / dust zones | FP-C type
The FP-C immersion heater with a flameproof enclosure and replaceable heating element. The devices are ATEX, IECEx, CSA, CU TR, KGS, CNEx, CCOE, and Inmetro certified. The products are intended for heating of process media. The heaters can be installed in pipelines or equipment units operated in Ex-zones. The heaters can be optionally provided with ATEX-certified thermostat controls. The heaters are intended for vertical installation and horizontal installation orientation versions are available on request.
Immersion heater | ATEX gas zones | FP type
The FP immersion heaters in flameproof enclosures. The devices are ATEX, IECEx, CSA, CU TR, KGS, CNEx, CCOE, and Inmetro certified. The heaters are intended for heating process media in piping systems and equipment units operated in explosive gas or dust atmospheres. The heaters can be optionally provided with ATEX-certified thermostats. The heaters are intended for vertical installation and horizontal installation orientation versions are available on request.