Ex-Repair and Maintenance Receptacle Distribution
40 A and 80 A distribution plastic version for zones 1 and 2
For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand grinders and such are needed but are not in accordance to the explosion-protection regulations. To be able to use these appliances in the Zone 1 or Zone 2 explosion-protected areas a hot work permit has to be issued. For the duration of the repair or maintenance work, the environment has to be free of all explosive hazardous atmospheres.
The CEAG explosion-protected repair and maintenance receptacle distributions are in accordance to regulations that in parts require a stationary installation. With the interlocking and lockable switch the utilization of the repair and maintenance receptacle distributions is selectively possible after a hot work permit has been issued. All sockets are equipped with high quality switches and RCDs and have separate MCB’s. Repair and maintenance sockets have a red signal lamp on the top side of the housing showing the actual state of connection.
- Industrial electrical devices can be used with a „hot work permit“
- Sockets with lamellar contacts for secure connection
- Lockable switch with all-pole switching and AC-3 motor switching capability
- High mechanical, chemical and thermal resistance
- Sockets can be locked separately
- GHG 981 0042 R0001
- GHG 981 0043 R0001
Ex Electrical Equipment – offer
