Ex-linear light fittings ATEX
The experience of the engineers at HARDO has enabled the identification of typical challenges associated with lamp installations that can increase the overall project costs. As a result of these insights, HARDO engineers have developed an exceptionally versatile lighting fixture suitable for both primary and emergency lighting in explosion hazard zones, all while maintaining reasonable production costs.
OptiLine basic lighting fixtures ATEX for zones 21, 22, and 2 – HARDO
Dustproof and resistant to strong jets of water and UV radiation, this linear explosion-proof LED fixture is certified for gas zone 2 as well as dust zones 21 and 22. Designed for general lighting of halls, industrial spaces, production and storage areas with special consideration for the requirements of the petrochemical, chemical, oil, energy, gas, wood, paper, and food industries. The OptiLine fixture is designed to minimize the total lighting installation costs for investors.
OptiLine ATEX emergency fixtures with internal battery for zones 21, 22, and 2
The linear explosion-proof LED OptiLine fixture, dedicated to gas zones: 2 and dust zones: 21 and 22, guarantees high-quality lighting while maintaining exceptional resistance to dust, water, and UV radiation. It is perfectly adapted for lighting halls and industrial spaces in various industries, including petrochemical, chemical, oil, energy, gas, wood, paper, and food. Developed to optimize installation costs for investors, OptiLine is an ideal solution for demanding industrial applications. It can serve as both basic and emergency lighting, eliminating the need for separate installations.
OptiLine emergency fixtures for central battery for Ex zones 21, 22, and 2
The Ex ATEX LED OptiLine linear fixture, certified for use in gas zones 2 and dust zones 21 and 22, is not only dustproof and resistant to water and UV but also ideal for lighting a variety of industrial and storage spaces. It is effective in many industrial sectors, including petrochemical, chemical, oil, energy, gas, wood, paper, and food, offering significant reductions in total lighting installation costs for investors. It can serve as both a primary lighting fixture and an emergency one, eliminating the need for separate installations.
Our robust series of fluorescent light fittings with plastic enclosures and their tried and tested technology have been in use under tough conditions for more than 20 years. They are adapted continuously to keep them up-to-date with the latest technological developments. The lamps feature a variety of innovations and have set global standards with regard to safety and reliability in a harsh environ-ment.
Fluorescent light fittings with their tried and tested technology are the best choice for many illumination tasks in hazardous environments.
Ex-Linear light fittings
The eLLK 92 linear luminaire series for fluorescent lamps combines the latest lighting technology with the requirements of a harsh and hazardous environment. This luminaire series is available in various sizes as a ceiling mounted light fitting (eLLK) and as a pole-mounted light fitting (eLLM).
Ex-Linear LED light fittings
The explosion-protected linear light fittings series eLLK / M 92 LED 400/800 combines the latest LED technology with the protection of a reliable housing solution. As a result, this light fitting series is the ideal solution for lighting tasks in harsh and hazardous environments.
Ex-Emergency light fittings with a self-cont-ained battery system
Emergency lighting luminaires with a self-contained battery system provide a decentralised solution for the mandatory emergency lighting, independent of central systems. In large plants, in particular, these luminaires offer significant cost benefits.
Ex-Linear light fittings made of stainless steel
The light fitting series eLLS 08 combines the latest lighting technology with a robust construction. Thanks to a new charging and monitoring technology with intelligent microelectronics, the NE emergency lighting luminaires provide reliable safety and reduced maintenance costs. Because they are made of high-grade, seawater-resistant stainless steel, they are extremely robust and resistant to aggressive chemical environments and are therefore, ideal for all hazardous areas with extreme ambient conditions.
Ex-Recessed, ceiling light fittings in metal design
The Ex-recessed ceiling light fittings of the series eLLB 20 are equipped with EVG 09 electronic ballasts and are suitable for two-pin fluorescent lamps. These lamps are used for surface and flush mounting in ceilings, in particular in clean rooms where smooth, flush surfaces, are very important. They are often used in the pharmaceutical and chemical industries, and experimental facilities, as well as in paint shops and spraying cabinets.
Ex-Recess-mounted ceiling emergency light fittings in metal design
The Ex recess-mounted ceiling emergency lighting eLLB 20 fittings are equipped with EVG 09 electronic ballasts and are suitable for two-pin fluorescent lamps. These light fittings are used for surface and flush mounting in ceilings, in particular in clean rooms where smooth, flush surfaces are very important. They are often used in the pharmaceutical and chemical industries, and experimental facilities, as well as in paint shops and spraying cabinets.
Ex-Recessed-mounted, ceiling light fittings in compact metal design
The Ex recessed-mounted, ceiling light fittings RLF .. are equipped with EVG 09 electronic ballasts and are suitable for two-pin fluorescent lamps. These lamps are used for surface and flush mounting in ceilings, in particular in clean rooms where smooth, flush surfaces are very important. The area of application is in the pharmaceutical and chemical industries, and experimental facilities, as well as in paint shops and spraying cabinets.
Ex-Linear light fitting with metal housing for surface mounting
With its flameproof housing made of copper free aluminium (Cu < 0.1 %), high degree of protection IP67 and a protective tube made of borosilicate glass with a high mechanical and thermal stability, this luminaire is the ideal solution for harsh and hazardous environments.
Ex-Fluorescent emergency light fitting with metal housing
With its flameproof housing made of copper free aluminium (Cu < 0.1 %), high degree of protection IP67 and protective tube made of borosilicate glass with a high mechanical and thermal stability, this luminaire is the ideal solution for harsh and hazardous environments.
Ex-Linear light fitting with metal housing
With its flameproof housing made of copper free aluminium (Cu < 0.1 %), high degree of protection IP67 and protective tube made of borosilicate glass with a high mechanical and thermal stability, this luminaire is the ideal solution for harsh and hazardous environments.
Ex-Linear light fittings for fluorescent lamps
The linear luminaires series nLLK 08 for fluorescent lamps combines the latest lighting technology with the requirements of a harsh and hazardous environment. This luminaire is available both as a ceiling mounted luminaire (nLLK), as well as a pole mounted light fitting (nLLM) in 3 sizes (18, 36 or 58 W).
Ex-Linear emergency light fittings for fluorescent lamps
The linear emergency luminaires series nLLK 08 .. N for fluorescent lamps combines the latest lighting technology with the requirements of a harsh and hazardous environment.
Ex-Linear emergency light fittings for fluorescent lamps
The linear luminaires series nLLK 09 for fluorescent lamps has been specially designed for areas with high ambient temperatures up to 60 °C. This makes it especially suitable for use in areas with high temperatures, such as in refineries, chemical plants, etc. in hot climates and in indoor areas with a high heat load. It combines the latest lighting technology with the requirements of a harsh and hazardous environment.
Ex-Linear luminaires for T5 HE fluorescent lamps
Certified for use in hazardous areas in Zone 2 and 22, the linear luminaires series nLLK 10 for T5 fluorescent lamps (Ø 16 mm) combines a cutting- edge lighting technology with the requirements of a harsh and hazardous environment.
nLLK 15 LED Ex-Linear Light Fitting
The series of light fittings nLLK 15 LED for Aura UltiLED (Pro) long life LED tubes combines latest lighting engineering with the requirements of harsh and hazardous environments. The explosion protected luminaires are approved for use in gas- and dust-Ex-areas fulfilling the requirements of the ATEX directive 2014/34/EU. They are designed and tested according to the latest standards for Ex-equipment for use in Zone 2 gas Ex-areas and Zone 22 of dust Ex-areas. The nLLK 15 LED luminaries are helping to increase your safety and save energy. The clear energy saving and the higher quality of lighting are made by use of Aura UltiLED (Pro) long life LED tubes in combination with a special designed electronic driver that will sustainably reduce your cost of operations.
Ex-Linear LED light fitting LL48
LL48 Ex-Linear LED luminaires are designed to withstand the harshest conditions within gas Ex areas Zone 2 and dust Ex areas Zone 21 and 22, providing ideal solutions for a wide range of applications. With its rated luminous flux up to 8000 lm the LL48 is suitable for applications where high light output is required, comparable to a 2 x 58 W fluorescent light fitting. LL48 Ex-Linear LED combines a shock and vibration resistant luminaire with the low cost of ownership and energy efficiency of the Crouse-Hinds Series LED technology. High-performance LEDs and a solid-state electronic driver provide light where you need it, at a fraction of the operating costs of conventional lighting technologies.
Ex-Twilight switch
For the comfortable and automatic control of lighting in hazardous areas. This screw-in twilight switch has been approved for direct installation in Ex-d and Ex-e enclosures. The electronics and the light-sensitive sensor are encapsulated in a flameproof light alloy enclosure with a M32 x 1.5 threaded connection. The encapsulated connection cables are 500 mm long.
Fixing systems for installing luminaires
The one-off manufacture of individual assembly systems for installing lighting systems is often very costly. The patented Complete Assembly System is a low-cost, standard fixing system for light fittings on industrial rails, walls or steel beam constructions.
Ex lighting – offer
