Safety for your protection

CEAG products provides explosion protection in a snap – and that also applies to distributions. Electrical distributions for Ex-areas must be protected according to EN 60079 by constructional measures. Thus, the Eaton’s Crouse-Hinds Business flameproof moulded-plastic distributions provide type Ex-e protection.

The enclosure and main-switch modules are available in the following materials: fibreglass reinforced polyester, electro-polished stainless steel and polyester powder-coated steel. Moulded plastic enclosures are flame-retardant according to UL 94 VO. All modules come in standardised sizes and can be inter­connected as desired.

Cable entries of all kinds can be mounted individually on the screwless plastic or brass flanges. Since these flanges can be inserted in a snap, cable entries can be easily mounted at any time. The same applies to other extensions or modifications.

Bus-bar modular

A bus-bar system can be used to provide power to the individual components. The flameproof encapsulated modules (Ex-d) can be combined according to customers‘ specifications. Five enclosure sizes provide enough space for whatever modules are required: MCBs, RCDs, RCBOs, contactors, motor starters, over current trips, star-delta time relays or main switches. The modules are inserted in the distribution by simple snap-on rail mounting. Thus, modules can be replaced or added quickly and reliably. Lockable actuating flaps allow operation without opening the enclosure.

• Modular slip-on assembly
• High IP66 protection
• Snap-on components
• Retrofitting

• MCB distribution for lighting circuits, heating circuits, socket distributions
• Twilight switch with Ex-e enclosure
• Complete motor starter distribution