IR-13 infra-red detector

IR-13 infra-red detector
Donat Czapski

Donat Czapski – I am at your disposal

+48 695 244 220

info@grupa-wolff.com

Design
Delivery
Installation
Service

We know the requirements of insurers

From ATEX AUDIT to protection implementation

We provide 24/7 service

IR-13 infra-red detector

Applications:

  • An explosion suppression system component installed on ductwork and piping connected to bucket conveyors, filters, tanks and other processing equipment types. It provides instant detection of the ignition of an explosion
  • Identification of ignition sources, including flames or localized glowing spots or flame in processing lines, piping and ductwork for triggering the protection system
  • Fast detection of explosion propagation within the ductwork for triggering the protection system
  • For application in indoor spaces without access of direct daylight

Specifications:

  • The IR-13 infra-red detector is intended for detection of sparks and flames in closed piping and ductwork;
  • The IR detector monitors the entire cross-sectional diameter of the duct or pipe with three optical fibres laid out in 120° intervals;
  • In-duct operating temperature: 250˚C maximum;
  • Response time in single milliseconds;
  • Programmable as fire or spark detector (by adjusting the response sensitivity);
  • Optical detection array operating temperature range: -20°C to +250°C;
  • Protection type: II ½ D T 80C IP 65, II 1/3G Eex II T5;
  • ATEX-compliant design.

Model approach to explosive safety in an industrial plant

Model approach to explosive safety in an industrial plant

Step 1
ATEX Audit

During the ATEX Audit, we will focus on deficiencies in explosive safety and indicate tasks that should be performed first to have the strongest impact on safety improvement.

Model approach to explosive safety in an industrial plant

Step 2
Protection Concept

The result of the ATEX Audit is also a preliminary concept of protecting the installation from explosion. It allows estimating the costs of protections. After testing the explosiveness parameters of the dust from the installation, we move on to the final concept and design.

Model approach to explosive safety in an industrial plant

Step 3
Design and selection of protections

After accepting the concept and testing the explosiveness parameters of the dust from the installation, we proceed to the final selection of explosion protections and create a design that takes into account all required changes in production.

Model approach to explosive safety in an industrial plant

Step 4
“Turnkey” delivery and installation

We coordinate the entire delivery and installation process of protections. We have our own service teams with experience in performing installation without the need to stop the investor’s plant operation.

Model approach to explosive safety in an industrial plant

Step 5
Execution of ERA and EPD

We conduct a post-implementation Explosion Risk Assessment (ERA) and prepare (or update) the Explosion Protection Document (EPD). We usually also conduct training for the crew in the field of explosive safety.

Secure your industrial plant

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry