Ex-e/i Cable Glands
Plastic version for Zone 1, 2, 21 and 22 1 – according to EN 60079-0: 2012
Cable glands with metric screw-in threads are now standard and had replace the PG cable glands that were formally used.The CEAG plastic cable glands are in accordance with EN 60079-0: 2012 and can be used in Ex-e/Ex-i housings in hazardous areas of the Zones 1, 21, 2 and 22.
Check out HARDO brand cable glands
HARDO explosion-proof cable glands are an excellent alternative to well-known global manufacturers. They are certified for use in zones 1, 2, 21 and 22. We supply all cable glands with accessories according to the investor’s requirements.
Conform with latest standards
Cable glands with metric screw-in threads are now standard and had replace the PG cable glands that were formally used.The CEAG plastic cable glands are in accordance with EN 60079-0: 2012 and can be used in Ex-e/Ex-i housings in hazardous areas of the Zones 1, 21, 2 and 22.
Optional and not used cable glands must be closed with certified blanking plugs. The blanking plugs allow for a flexible and cost effective utilization of the explosion-protected appliances. Changes and upgrades can be then easily carried out at a later date. The outstanding feature of the CEAG cable glands is the large cable connection area.
Degree of protection
A high IP safety standard is achieved with the integrated sealing lip on the screw-in cable entries. Depending on the surface roughness the use of an additional sealing ring may not be necessary. The good mechanical and handling features are achieved by using a modified Polyamide material and a optimized tooling area.
- Large cable connection area
- Same wrench tool for both hexagons
- Conform accd. to latest EN 60079-0:2012
- Safety standard IP66
- Optimized tooling area
- Trapezoid thread, for a secure hold
- Ex-Cable plastic glands
- Ex-plastic screw plug / blanking plugs
- Ex-plastic reducer rings
- Ex-trumpet-shaped cable glands
- Ex-drainage plug
- Accessories for Ex-cable glands