Ex-e/Ex-i Terminal Enclosures

Stainless steel version for Zone 1, 2, 21 and 22

The explosion-protected terminal enclosures made of stainless steel (AISI 316 L) with ground surfaces was developed for instrumentation and control installations using the Ex-e and Ex-i technologies. They act as a link between the main cable to the control room and the branch cables into the field. In addition to this, they may also be used for the direct connection of actuators and sensors. Here the metal cable glands also allow electromagnetically compatible connection methods.

Looking for a less expensive alternative perhaps?

Check out HARDO brand terminal boxes

HARDO explosion-proof terminal boxes are an excellent alternative to well-known global manufacturers. They are certified for use in zones 1, 2, 21 and 22. We supply all control stations with accessories according to the investor’s requirements.

CEAG terminal boxes description

Robust design

The robust design of the stainless steel terminal boxes provides a high degree of safety for offshore applications and in places where particularly adverse chemical, mechanical and climatic operating conditions prevail within the hazardous area. Three series of terminal enclosures are available in various sizes accommodating up to 7 x 128 terminals. The choice between screw and tension-spring (screwless) terminals for single and multi-wire conductors makes it possible for the installation engineers to select the type of connection that is most suitable for the respective application.

Metal flange

Two separate PE rails are available for the separate connection of PE/PA and screened cables. Due to the optimized design, there is a large drilling area for fitting a large number of metal glands. Unused entry holes must be sealed safely with certified blanking plugs. As an alternative, a screw-on metal flange can be used for a wide variety of applications.