Connecting drives

The CEAG connection and junction boxes are used in Zones 1, 2, 21 and 22 as junction boxes for the connection of pumps, heating, motordrives etc. in hazardous explosion endangered areas.

The connection and junction boxes are fitted with certified terminals accommodating for 240 mm² according to EN 60079. For larger terminal cross sections, versions with terminal bolts are also used. A special version with terminal rails accommodating for 240 mm² and a double cable end box enables the connection of larger terminal cross sections. The cable to be connected is put through the front side and is laid into the double cable terminal box where it is then connected to the terminal bolts on the copper rail.

The terminal boxes are fitted with trumpet shaped cable glands and a strain relief or just a strain relief for a flexible cable outlet.

• Decisive cost reduction with the CEAG mounting system using junction boxes accommodating for 70 mm²
• With four cables, connections of up to 240 mm² possible
• Mechanical, chemical and thermal durability

• Type 791 02 assembled with screw terminals 2 x 4 mm² + 1 x PE-terminals 2 x 4 mm²
• Type 721 00 assembled with screw terminals 2 x 10 mm² + 1 x PE-terminals 2 x 10 mm²
• Type 745 02 assembled with screw terminals 2 x 35 mm² + 1 x PE-terminals 2 x 35 mm²
• Type 745 02 assembled with screw terminals 2 x 50/70 mm² + 1 x PE-terminals 2 x 50/70 mm²
• Type 746 03 assembled with bold clamp 2 x 185 mm² + PE-bold clamp 2 x 185 mm²
• Type 746 03 assembled with bold clamp 240 mm² + PE-bold clamp 240 mm²
• Type 746 03 assembled with bold clamp 240 mm² + PE-bold clamp 240 mm²