Ex-Pendant light fittings and floodlights of the series NVMV

Ceag NVMV
Donat Czapski

Donat Czapski – I am at your disposal

+48 695 244 220

info@grupa-wolff.com

Design
Delivery
Installation
Service

We know the requirements of insurers

From ATEX AUDIT to protection implementation

We provide 24/7 service

Ex-Pendant light fittings and floodlights of the series NVMV

(Zone 2, 21, 22)

The NVMV series of pendant light fittings for high-pressure discharge lamps in IEC metallic design is suitable for operation in hazardous areas in Zone 2 and Zones 21/22, in particular in harsh environments with high mechanical load, moisture and dust. The lights are available in 2 sizes: The small enclosure for lamps from 70 W to 250 W (preferably 70 -150 W); the large enclosure for lamps of 250 W and 400 W. All versions can be operated with both HSE and HIE lamps and are suitable for low and medium suspension heights. Thanks to their high degree of ingress protection and wide temperature range, this series can also be used under extreme conditions.

Wide range of applications

The NVMV lighting series is suitable for wall, ceiling and pole mounting. This makes them the ideal solution for almost any industrial applications, such as the illumination of open spaces, indoor areas and roadways in industrial plants in the oil and gas industry, chemical plants, waste disposal facilities, shipyards, power stations and mills.

  • NVMV S / M pendant light fittings for high pressure discharge lamps
  • From 70 W to 400 W
  • Wide temperature range from -45 °C up to +55 °C
  • High degree of ingress protection IP66 for harsh environments

NVMV small enclosure, with ceiling mounting

  • S2MC 075 O 00
  • S2MC 105 O 00
  • S2MC 155 O 00
  • S2MC 255 O 00
  • M2MC 075 O 00
  • M2MC 105 O 00
  • M2MC 155 O 00
  • M2MC 255 O 00

NVMV small enclosure, with wall mounting

  • S2MW 075 O 00
  • S2MW 105 O 00
  • S2MW 155 O 00
  • S2MW 255 O 00
  • M2MW 075 O 00
  • M2MW 105 O 00
  • M2MW 155 O 00
  • M2MW 255 O 00

NVMV small enclosure, for pole mounting

  • S5NJ 075 O 00
  • S5NJ 105 O 00
  • S5NJ 155 O 00
  • S5NJ 255 O 00
  • M5NJ 075 O 00
  • M5NJ 105 O 00
  • M5NJ 155 O 00
  • M5NJ 255 O 00

NVMV large enclosure, for ceiling mounting

  • S2MC 255 OL 0
  • S2MC 405 OL 0
  • M2MC 255 OL 0
  • M2MC 405 OL 0

NVMV large enclosure, for wall mounting

  • S2MW 255 OL 0
  • S2MW 405 OL 0
  • M2MW 255 OL 0
  • M2MW 405 OL 0

NVMV large enclosure, for pole mounting

  • S5NJ 255 OL 0
  • S5NJ 405 OL 0
  • M5NJ 255 OL 0
  • M5NJ 405 OL 0

Ex lighting – offer

Industrial Lighting
Design

We specialize in industrial lighting, with a particular focus on facilities where there is: dust, corrosive atmosphere, explosion and fire hazards.

AB 05 LED EX ATEX

Ex-Ceiling pendant light fittings and floodlights

Mainly used in explosion-hazard areas, in both land and marine installations, in storage buildings, production halls, and chemical industry facilities.

Ex-linear light fittings

They are made of high-quality plastic with excellent mechanical properties and high resistance to chemicals.

Ex LED lighting

Our light fittings combines the latest LED technology with the protection of a reliable housing solution. As a result, they are the ideal solution for lighting tasks in harsh and hazardous environments.

Ex-escape sign luminaires ATEX

Ex-Signal and escape sign luminaires

The EXIT series of explosion-protected escape sign lumi­naires fulfils the requirements of ATEX Directive 2014/34/EU and EN 60598, Section 2.22 for emergency lighting lumi­naires. The luminaires are suited for marking escape routes and exits in hazardous areas.

Secure your industrial plant

Knowledge base

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry