Ex-Repair and Maintenance Receptacle Distribution 40 A and 80 A

Ex-Repair and Maintenance Receptacle Distribution
Donat Czapski

Donat Czapski – I am at your disposal

+48 695 244 220

info@grupa-wolff.com

Design
Delivery
Installation
Service

We know the requirements of insurers

From ATEX AUDIT to protection implementation

We provide 24/7 service

Ex-Repair and Maintenance Receptacle Distribution

40 A and 80 A distribution plastic version for zones 1 and 2

For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand grinders and such are needed but are not in accordance to the explosion-protection regulations. To be able to use these appliances in the Zone 1 or Zone 2 explosion-protected areas a hot work permit has to be issued. For the duration of the repair or maintenance work, the environment has to be free of all explosive hazardous atmospheres.

The CEAG explosion-protected repair and maintenance receptacle distributions are in accordance to regulations that in parts require a stationary installation. With the interlocking and lockable switch the utilization of the repair and maintenance receptacle distributions is selectively possible after a hot work permit has been issued. All sockets are equipped with high quality switches and RCDs and have separate MCB’s. Repair and maintenance sockets have a red signal lamp on the top side of the housing showing the actual state of connection.

  • Industrial electrical devices can be used with a „hot work permit“
  • Sockets with lamellar contacts for secure connection
  • Lockable switch with all-pole switching and AC-3 motor switching capability
  • High mechanical, chemical and thermal resistance
  • Sockets can be locked separately
  • GHG 981 0042 R0001
  • GHG 981 0043 R0001

Ex Electrical Equipment – offer

GRP Ex Terminal Boxes HARDO

Terminal
boxes

Increased insulation clearances of built-in components, high IP rating of enclosures, temperature restrictions, use of certified components and certified electrical equipment.

aluminum control stations hardo

Control
stations

The offered control stations and panels can be operated even under extreme industrial conditions. Our enclosures are resistant to corrosion and the effects of aggressive chemicals.

Explosion-proof cable glands for armored cables HARDO

EX Cable
glands

Ex cable glands are used wherever a properly protected connection of armored or non-armored cable to machinery or equipment is required.

eXLink - the Miniature-Power Connector

Electrical
connectivity

ATEX certified round plugs and receptacles – contact-making insert can be arranged in various positions

Our own
prefabrication

Guaranteed high quality due to total control over the product at each stage of the manufacturing process. Quick implementation due to shorter lead times for non-standard solutions

Secure your industrial plant

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry