Ex-Linear light fittings made of stainless steel

eLLS 08018/18
Donat Czapski

Donat Czapski – I am at your disposal

+48 695 244 220



Ex-Linear light fittings made of stainless steel

eLLS 08018/18 / eLLS 08036/36 / eLLS 08018/18 NE / eLLS 08036/36 NE

(Zone 1, 2, 21, 22)

The light fitting series eLLS 08 combines the latest lighting technology with a robust construction. Thanks to a new charging and monitoring technology with intelligent microelectronics, the NE emergency lighting luminaires provide reliable safety and reduced maintenance costs. Because they are made of high-grade, seawater-resistant stainless steel, they are extremely robust and resistant to aggressive chemical environments and are therefore, ideal for all hazardous areas with extreme ambient conditions.

Long-term safety

The luminaires are equipped with a two-channel electronic ballast that features a reliable EOL circuit. Thus, the lamps are checked for proper operation and shut down safely in the event of a malfunction at the end of their service life. With the NE-version a function test is carried out automatically on a weekly basis and a quarterly, partial duty-cycle test. These tests provide additional safety and drastically reduce the necessary amount of manual tests. The charging and discharging functions are monitored constantly by the micro-processor.

Simple and cost-effective installation

In conjunction with the generously dimensioned terminal compartment, the standard single-ended through-wiring allows a cost-effective installation. The double-sided locking facility with 10 or 20 latch points allows the protective bowl to be hinged on both sides, meaning that the fitting can be mounted on either side.

  • High-grade, seawater-resistant stainless steel housing
  • Cost efficient installation due to single-ended through-wiring
  • Dual channel ballast with EOL monitoring
  • Automatic function test and partial duty cycle test (NE)
  • LED display for indication of the charging, operation or fault status (NE)
  • Easy replacement of battery, even in Ex-area (NE)
  • High degree of protection IP66
  • eLLS 08018/18
  • eLLS 08036/36
  • eLLS 08018/18 NE
  • eLLS 08036/36 NE

Ex lighting – offer

Industrial Lighting

We specialize in industrial lighting, with a particular focus on facilities where there is: dust, corrosive atmosphere, explosion and fire hazards.


Ex-Ceiling pendant light fittings and floodlights

Mainly used in explosion-hazard areas, in both land and marine installations, in storage buildings, production halls, and chemical industry facilities.

Ex-linear light fittings

They are made of high-quality plastic with excellent mechanical properties and high resistance to chemicals.

Ex LED lighting

Our light fittings combines the latest LED technology with the protection of a reliable housing solution. As a result, they are the ideal solution for lighting tasks in harsh and hazardous environments.

Ex-escape sign luminaires ATEX

Ex-Signal and escape sign luminaires

The EXIT series of explosion-protected escape sign lumi­naires fulfils the requirements of ATEX Directive 2014/34/EU and EN 60598, Section 2.22 for emergency lighting lumi­naires. The luminaires are suited for marking escape routes and exits in hazardous areas.

Secure your industrial plant

Knowledge base

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry