Ex-Linear light fittings for fluorescent lamps

Donat Czapski

Donat Czapski – I am at your disposal

+48 695 244 220



We know the requirements of insurers

From ATEX AUDIT to protection implementation

We provide 24/7 service

Ex-Linear light fittings for fluorescent lamps

nLLK 08 18 W – 58 W

(Zone 2, 21, 22)

The linear luminaires series nLLK 08 for fluorescent lamps combines the latest lighting technology with the requirements of a harsh and hazardous environment. This luminaire is available both as a ceiling mounted luminaire (nLLK), as well as a pole mounted light fitting (nLLM) in 3 sizes (18, 36 or 58 W).

optiline lenses
Looking for a less expensive alternative perhaps?

Check out HARDO brand OptiLine lighting fixtures

OptiLine lighting fixtures are an excellent alternative to well-known global manufacturers. They are certified for use in zones 2, 21 and 22. The experience of the engineers at HARDO has enabled the identification of typical challenges associated with lighting installations that can increase the overall project costs. As a result of these insights, HARDO engineers have developed an exceptionally versatile lighting fixture suitable for both primary and emergency lighting in explosion hazard zones, all while maintaining reasonable production costs.

OptiLine basic lighting fixtures ATEX 12
Ex emergency lighting fixtures with a microinverter
Ex ATEX emergency lighting fixtures powered by a central battery

Long-term safety

The luminaires of this robust lighting series with plastic enclosure are equipped with a highly-efficient electronic ballast, which has a reliable EOL circuit. Thus, the lamps are checked for proper operation and shut down safely in the event of a malfunction at the end of their service life. With these luminaires, you are always on the safe side.

Simple and cost-effective installation

In conjunction with the generously dimensioned terminal compartment, the standard single-ended through-wiring allows a cost-effective installation. The double-sided locking facility with 10 or 20 latch points allows the protective bowl to be hinged on both sides, meaning that the fitting can be mounted on either side.

Just in case: The emergency lighting version

Safety is always our top priority. That is why we offer the nLLK 08 light fitting series with a built-in V-CG-S module. These luminaires can be connected to a CEAG emergency supply system with individual function monitoring. In the event of an emergency, they provide a reliable illumination of your safety and escape routes. The N variants (Section 1.2.92).are available as emergency light fittings with a self-contained battery unit.

NEC Standards

The tried and tested luminaires of the types nLLK 982217 (2 x 17 W) and nLLK 924232 (2 x 32 W) are available for use according to NEC-standards.

  • Cost-effective installation due to single-ended through-wiring
  • EVG with EOL monitoring
  • Double-sided safety lock
  • High degree of protection IP66
  • Connection to CEAG emergency light monitoring systems possible (CG-S)
  • EVF 120 E (1 x 18 W)
  • EVF 140 E (1 x 36 W)
  • EVF 165 E (1 x 58 W)
  • EVF 240 E (2 x 36 W)
  • EVF 265 E (2 x 58 W)
  • EVF 120 C (1 x 18/20 W)
  • EVF 140 C (1 x 36/40 W)
  • EVF 165 C (1 x 58/65 W)
  • EVF 240 C (2 x 36/40 W)
  • EVF 265 C (2 x 58/65 W)

Ex lighting – offer

Industrial Lighting

We specialize in industrial lighting, with a particular focus on facilities where there is: dust, corrosive atmosphere, explosion and fire hazards.


Ex-Ceiling pendant light fittings and floodlights

Mainly used in explosion-hazard areas, in both land and marine installations, in storage buildings, production halls, and chemical industry facilities.

Ex-linear light fittings

They are made of high-quality plastic with excellent mechanical properties and high resistance to chemicals.

Ex LED lighting

Our light fittings combines the latest LED technology with the protection of a reliable housing solution. As a result, they are the ideal solution for lighting tasks in harsh and hazardous environments.

Ex-escape sign luminaires ATEX

Ex-Signal and escape sign luminaires

The EXIT series of explosion-protected escape sign lumi­naires fulfils the requirements of ATEX Directive 2014/34/EU and EN 60598, Section 2.22 for emergency lighting lumi­naires. The luminaires are suited for marking escape routes and exits in hazardous areas.

Secure your industrial plant

Do you have any questions?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or send your inquiry