Ex-Linear luminaires for T5 HE fluorescent lamps

nLLK 10 14 W – 35 W

(Zone 2 and 22)

Certified for use in hazardous areas in Zone 2 and 22, the linear luminaires series nLLK 10 for T5 fluorescent lamps (Ø 16 mm) combines a cutting- edge lighting technology with the requirements of a harsh and hazardous environment.

Looking for a less expensive alternative perhaps?

Check out HARDO brand OptiLine lighting fixtures

OptiLine lighting fixtures are an excellent alternative to well-known global manufacturers. They are certified for use in zones 2, 21 and 22. The experience of the engineers at HARDO has enabled the identification of typical challenges associated with lighting installations that can increase the overall project costs. As a result of these insights, HARDO engineers have developed an exceptionally versatile lighting fixture suitable for both primary and emergency lighting in explosion hazard zones, all while maintaining reasonable production costs.

OptiLine basic lighting fixtures ATEX 12

Ex emergency lighting fixtures with a microinverter

Ex ATEX emergency lighting fixtures powered by a central battery

Description nLLK 10 14W - 35W

Energy-saving lighting technology

The nLLK 10 luminaires for T5 fluorescent lamps help to improve safety and to save energy. The use of T5 HE lamps with improved efficiency and high quality lighting results in a significant energy saving, which in turn reduces your operating costs significantly.

Long-term safety

The luminaires of this robust lighting series with plastic housings are equipped with a highly-efficient electronic ballast, which has a reliable EOL circuit. Thus, the lamps are checked for proper operation and shut down safely in the event of a malfunction at the end of the service life. With these luminaires, you are always on the safe side.

Simple and cost-effective installation

In conjunction with the generously dimensioned terminal compartment, the standard single-ended through-wiring allows a cost-effective installation. The double-sided locking facility with 10, 20 or 24 latch points allows the protective bowl to be hinged on both sides, meaning that the fitting can be mounted on either side.