Special purpose earth clamps

The following special purpose earthing clamps may be distinguished:

  • ALS-10A type aviation clamp
  • Type C earth clamps
  • Pipe clamp JR-150
Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

ALS-10A type aviation clamp

ALS-10A type aviation clamp, with jaws of plated steel, is intended for connecting earth rods or aircraft undercarriage
The clamp is made in conformity with U.S. military specifications: NSN#5999-00-134-5844 and MIL M83413/7-1.

Type C earth clamps

Type C earth clamps of are applied for semi-durable connecting of such elements as drums with a storage rack or wherever a strong bolt connection is required. The clamps are made of galvanized steel (screw) and stainless steel. It is available in two sizes: 3/4″ and 2″.

Pipe clamp JR-150

Pipe clamp JR-150 in the form of a clamping ring provides a semi-durable earthing connection of various type elements of installations with conducting pipes. The clamp is made of bronze cast. It can be applied with pipes with the following diameters: 1/2”-3/4 ”, 2”, 3”, 4”, 6”.

Are you interested in the above topic?

Donat Czapski Grupa WOLFF zdjecie
DONAT CZAPSKI - I am at your disposal

We will answer questions about: offer, technical specification, delivery, assembly.

or just simply use the contact form below:

    Electrostatic Earthing – the offer

    Earthing control systems

    Earth control systems
    with process lock (tanks, big bags)

    You can use them in the field of earthing monitoring of e.g. road tankers, railways, big-bags, as well as components of process plants. Earth-Rite systems verify easily and safely that the stored loads are properly discharged to the ground through a monitoring unit with a signal lightning diode. If the earthing is not performed properly, the controllers block the process.

    Multiple elements earthing control system

    Multiple elements
    earthing control system

    The MULTIPOINT II system is a device designed to control the earthing of up to 8 self-acting or interconnected system components at the same time. According to the guidelines of international standards for the control of unwanted static discharges, the correctness of earthing will only be confirmed by the system if the resistance of the earthing node on each channel is less than 10 Ω.

    Clamps with earthing control

    Clamps with earthing control
    (IBC tanks, drums, big-bags)

    We can offer you clamps with monitoring the state of earthing of barrels, tanks, etc. These solutions, in addition to earthing the equipment operating in production rooms, by means of a monitoring unit with a signalling diode, easily and safely verify that the charges accumulated on the equipment are properly discharged to earth.

    Simple earthing clamps for single- and two-core cables

    wires, spools

    Earthing clamps can be used in two configurations – as a set of two simple clamps connected with each other by a spiral cable, or as a connection of the clamp to a earthed container and a ring clamp, which is located at the end of the cable, to a earthing strip.

    Shoe inspection stations Ex ATEX

    Shoe inspection
    stations Ex ATEX

    The electrified human body is one of the most serious sources that pose a fire or explosion hazard in industrial conditions. An example of a solution that checks footwear for its ability to dissipate electrostatic charges before an employee enters an area with flammable atmospheres is the Sole-Mate shoe control system.

    Secure your industrial plant